You must register to have access to the complete forum.

Author Topic: SuperSaw Unison Mode  (Read 3120 times)

Burkuagh

  • Full Member
  • ***
  • Posts: 142
SuperSaw Unison Mode
« on: June 07, 2017, 10:40:06 AM »
Is the SuperSaw Unison Mode supposed to still  free float when you turn up the Phase setting?  Or can it not be phase-locked?

Markus Krause

  • Tone2.com audiosoftware
  • Administrator
  • Hero Member
  • *****
  • Posts: 3407
    • Tone2.com audiosoftware
Re: SuperSaw Unison Mode
« Reply #1 on: June 07, 2017, 02:01:45 PM »
This behaviour is intended, since the original SuperSaw from the JP8000 is 'free running'.

Instead of this select HyperSaw as mode. Here you can use phase to trigger it.