You must register to have access to the complete forum.

Author Topic: 432Hz Tuning in Gladiator 3  (Read 3049 times)

Kael Sounds

  • Newbie
  • *
  • Posts: 1
    • Kael Sounds WEB
    • Email
432Hz Tuning in Gladiator 3
« on: January 21, 2019, 11:24:04 PM »
Good day friends  :)
I write to consult, how can I configure the gladiator tuning in 432Hz?  :question:
I appreciate your collaboration :)
Kael Sounds - Audio Factory SAS
Reggaeton, Trap, Pop
Music Producer
http://kaelsounds.com.co/

Markus Krause

  • Tone2.com audiosoftware
  • Administrator
  • Hero Member
  • *****
  • Posts: 3405
    • Tone2.com audiosoftware
Re: 432Hz Tuning in Gladiator 3
« Reply #1 on: January 22, 2019, 09:19:48 AM »
Hello Kael,

In the glide / pitch section (this trick works with nearly all synthesizers):
1) Set pitchwheel range to +-1
2) In the host's music track send pitchweel with -30%

or

In the osc section of Gladiator:
- Set osc12 and osc34 'FINE' to -14 cent

or


In the modulation matrix  (this trick works with all Tone2 synthesizers except FireBird):
1) Select 'static' as source
2) Select 'fine' as target
3) Set send level to -0.4 / -40%


or


Create a complete song with 440Hz. Once you are finished use an audio editor like Wavelab or Goldwave and pitchshift the mix by -32 Hz = 98,18%. This trick works always and with any kind of material.



Best Regards,
Markus
« Last Edit: January 22, 2019, 10:20:56 AM by Markus Krause »