Tone2 support forum

General Category => Gladiator => Topic started by: Kael Sounds on January 21, 2019, 11:24:04 PM

Title: 432Hz Tuning in Gladiator 3
Post by: Kael Sounds on January 21, 2019, 11:24:04 PM
Good day friends  :)
I write to consult, how can I configure the gladiator tuning in 432Hz?  :question:
I appreciate your collaboration :)
Title: Re: 432Hz Tuning in Gladiator 3
Post by: Markus Krause on January 22, 2019, 09:19:48 AM
Hello Kael,

In the glide / pitch section (this trick works with nearly all synthesizers):
1) Set pitchwheel range to +-1
2) In the host's music track send pitchweel with -30%

or

In the osc section of Gladiator:
- Set osc12 and osc34 'FINE' to -14 cent

or


In the modulation matrix  (this trick works with all Tone2 synthesizers except FireBird):
1) Select 'static' as source
2) Select 'fine' as target
3) Set send level to -0.4 / -40%


or


Create a complete song with 440Hz. Once you are finished use an audio editor like Wavelab or Goldwave and pitchshift the mix by -32 Hz = 98,18%. This trick works always and with any kind of material.



Best Regards,
Markus